LINETRAXX® CMD420/CMD421
The CMD420/421 current monitoring devices monitor AC currents using three measuring inputs for overcurrent, undercurrent or undercurrent and overcurrent (window discriminator function). The currents are measured as r.m.s. values (AC). The currently measured values are continuously shown on the LC display. The respective measuring channel can be selected using the Arrow up or Arrow down button. The measured values causing the alarm relay to switch are stored. Due to adjustable delay times, installation-specific characteristics, such as device-specific making currents, short-time current changes etc. can be considered. For the measurement three standard current transformers are to be connected to the respective CMD420/421. The transformation ratio "n" of the current transformers (n = x/1A resp. n = x/5A) can be set up to a factor of n = 2000. Then the actual current of the installation can be calculated by multiplying the measured current by factor "n" and indicated on the display. The currents can derive from a 3-phase system or from three different single-phase systems. The CMD420/421 series requires external supply voltage
The CMD420/421 current monitoring devices monitor AC currents using three measuring inputs for overcurrent, undercurrent or undercurrent and overcurrent (window discriminator function). The currents are measured as r.m.s. values (AC). The currently measured values are continuously shown on the LC display. The respective measuring channel can be selected using the Arrow up or Arrow down button. The measured values causing the alarm relay to switch are stored. Due to adjustable delay times, installation-specific characteristics, such as device-specific making currents, short-time current changes etc. can be considered. For the measurement three standard current transformers are to be connected to the respective CMD420/421. The transformation ratio "n" of the current transformers (n = x/1A resp. n = x/5A) can be set up to a factor of n = 2000. Then the actual current of the installation can be calculated by multiplying the measured current by factor "n" and indicated on the display. The currents can derive from a 3-phase system or from three different single-phase systems. The CMD420/421 series requires external supply voltage
Features
- Undercurrent and overcurrent monitoring in AC systems with prealarm and main alarm or current monitoring with window discriminator function
- Current monitoring using current transformers, suitable for standard transformers x/1 A, x/5 A (depending on the device type)
- Transformation ratio n allows adaptation to all standard current transformers x/1 A, x/5 A
- Start-up delay, response delay and delay on release
- Adjustable switching hysteresis
- r.m.s. value measurement AC
- Digital measured value display via multi-functional LC display
- LEDs: Power On, Alarm 1, Alarm 2
- Fault memory for the operating value
- Cyclical self monitoring
- Internal test/reset button
- Two separate alarm relays with one changeover contact each
- N/C or N/O operation and fault memory behaviour selectable
- Password protection for device setting
- Sealable transparent cover
- Two-module enclosure (36 mm)
- Push-wire terminal (two terminals per connection)
- RoHS compliant
Applications
- Current consumption of motors, such as pumps, elevators, cranes
- Monitoring of lighting circuits, heating circuits, charging stations
- Monitoring of emergency lighting
- Monitoring of screw conveyors, e.g. in sewage plants
- Dust removal in wood working
- 70 % agreement in accordance with EEG 2012 for PV inverters
LINETRAXX® CMD420/CMD421 Variant(s)
| Type | Supply voltage US* | Measurement | Response value | Art. No.** |
|---|---|---|---|---|
| CMD420-D-1 | AC 16…72 V / DC 9,6 V…94 V, 15…460 Hz | via current transformer x/1A | 0,1…1 A x n | B73060006 B93060006 |
| CMD420-D-2 | AC/DC 70…300 V 15…460 Hz | via current transformer x/1A | 0,1…1 A x n | B73060007 B93060007 |
| CMD421-D-1 | AC 16…72 V / DC 9,6 V…94 V, 15…460 Hz | via current transformer x/5A | 0,5…5 A x n | B73060008 B93060008 |
| CMD421-D-2 | AC/DC 70…300 V 15…460 Hz | via current transformer x/5A | 0,5…5 A x n | B73060009 B93060009 |
* Absolute values
**(B7… = push-wire terminal / B9… = screw-type terminal)
Optional Accessories for LINETRAXX® CMD420/CMD421
| Type | Art. No. |
|---|---|
| Mounting clip for screw mounting (one piece per device) | B98060008 |
| Mounting frame XM420 | B990994 |
Downloads for LINETRAXX® CMD420/CMD421
| Category | Name | Size | Language | Timestamp | D-/B-Number |
|---|---|---|---|---|---|
| Declarations of Conformity | UKCA - CMD42x | 122.0 KB | 2023/03/06 10:04:3606.03.2023 10:04:36 | ||
| CE Declarations of Conformity | CMD42x | 89.1 KB | 2023/02/13 06:27:1213.02.2023 06:27:12 | ||
| Manuals | CMD420/421 | 2.8 MB | EN | 2021/11/03 08:21:1603.11.2021 08:21:16 | D00101 |
| Datasheets | CMD420/421 | 330.2 KB | EN | 2022/06/09 10:54:3709.06.2022 10:54:37 | D00101 |
| Quickstarts | CMD420/421 | 1.0 MB | EN | 2021/11/03 10:53:2503.11.2021 10:53:25 | D00101 |
| Datasheets | XM420 interface options | 223.5 KB | EN | 2019/05/13 10:31:3613.05.2019 10:31:36 | D00051 |
| Technical Information | Changed variants of relays from goldplated to silver-plated contacts | 166.3 KB | EN | 2022/06/27 09:03:0827.06.2022 09:03:08 |